From tymelys22@tadamson.greatxscape.net Wed Jul 19 04:44:01 2000
Subject:Re: Voce V-3 questions

-

Hi,

I don't know whether this will be of any help, but I use a Bespeco
in-line stereo volume(expression) pedal with my E-mu module and with
my XM1. They retail at £22 plus P&P. I think that their web-site
is
bespeco.co.uk or maybe .com.
The model number is VL14 L. Their telephone number is 44 {0}17333
90511, I understand that you should miss the first zero from
outside
UK.
As the pedal is in line, you plug two mono jack leads from the module
into the rear of the pedal and two out from the rear of the pedal
and
into the pre-amp/mixer or whatever. This solution is cheap, works
well and could be used in all manner of set-ups, especially
multi-keyboards, where the output from the mixer could be fed to the
pedal and then onwards to the amp.
I believe that they ship UPS.

Thomas.

-- In VoceSupportGroup@egroups.com, "Carl Benick"
wrote:
> Hello everyone,
>
> After having my V-3 for several months now, I am just now starting
to
> play with it. The more I mess with it the more I really like it, but
> I've got some questions.
>
> First, I hear the popping caused by a MIDI volume pedal that has
been
> talked about on the list and I don't like it. Will the clicking and
> popping still be present If I control the volume or expression from
> the rear pedal jack on the V-3? I want to control the volume of dual
> manuals plus MIDI pedals just like a B-3.
>
> Can I use an original Yamaha DX7 expression pedal for use with the
> V-3's rear pedal jack? If not, where is a good source for a pedal
> that will work?
>
> If I'm used to playing a real B-3 and I want an expression pedal for
> my V-3 that I'll be happy with, should I continue to mess with the
> V-3's pedal capabilities or should I buy a volume pedal that I route
> the V-3's audio output through? Any recommendations if this it the
> route I choose?
>
> If our PA is monaural, do I need to sum the stereo outputs from the
> V-3 to get the best internal rotary simulation, or do I simply use
> only one of the audio outputs? If I use only one output jack, will
> I only get half of the simulated rotary horn's cycle?
>
> Does the V-3 have separate 16' and 8' pedal drawbars and can I
assign
> them to separate MIDI controls or sliders?
>
> Is there a percussion boost mod for the V-3?
>
> Finally, my V-3's front panel (green) LED's are so bright that they
> blind me when trying to read the front silk screens. I would like to
> modify thier brightness. Has anyone else done this or has
experienced
> this problem?
>
> Thanks, Carl Benick
>
______________________________________________________________________
__
> Get Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail.com